IBM RS/6000 44P 270 Service Manual page 212

RIPL (Remote Initial Program Load): Enables you to select a remote
system from which to load programs through a network adapter when your
system unit is first turned on. This option also allows you to configure
network adapters, which is required for RIPL. Go to "RIPL" on page 201.
SCSI ID: Allows you to view and change the addresses (IDs) of the SCSI
controllers attached to your system unit. Go to "SCSI ID" on page 206.
Console: Allows the user to select which console to use to display the
SMS menus. This selection is only for the SMS menus. It does not affect
the display used by the AIX operating system.
Follow the instructions that display on the screen. Pressing the number 1
key after the keyboard icon appears and before the tone returns you to
SMS.
194
Service Guide