IBM RS/6000 44P 270 Service Manual page 180

v Boot Mode Menu
Allows users to configure the system to automatically start a specific function on the
next system start. This configuration applies to the next boot only and is reset to the
default state of being disabled following a successful boot attempt.
98. Return to Previous Menu
1>
– Enabling the Boot to SMS Menu option
Causes the system to automatically enter the System Management Services
menu during the boot process. Enabling this option is equivalent to pressing 1 on
the attached ASCII terminal (or F1 on a graphics terminal) while the system
initialization indicators display on screen.
– Enabling the Service Mode Boot from Saved list option
Causes the system to automatically enter the stand-alone diagnostics (see
"Standalone Diagnostics" on page 147 for more information about stand-alone
diagnostics). Enabling this option is equivalent to pressing 5 on the attached
ASCII terminal (or F5 on a graphics terminal) while the system initialization
indicators display on screen.
– Enabling the Service Mode Boot from Default List option
Causes the system to automatically enter the online diagnostics in service mode
(see "Online Diagnostics" on page 147 for more information about online
diagnostics). Enabling this option is equivalent to pressing 6 on the attached
ASCII terminal (or F6 on a graphics terminal) while the system initialization
indicators display on screen.
– Enabling the Boot to Open Firmware Prompt option
Causes the system to automatically enter open firmware prompt (also called the
OK prompt). Enabling this option is equivalent to pressing 8 on the attached ASCII
terminal (or F8 on a graphics terminal) while the system initialization indicators
display on screen (see "Open Firmware" on page 222 for more information about
the open firmware prompt).
162
Service Guide
BOOT MODE MENU
1. Boot to SMS Menu:
Currently Disabled
2. Service Mode Boot from Saved List:
Currently Disabled
3. Service Mode Boot from Default List:
Currently Disabled
4. Boot to Open Firmware Prompt:
Currently Disabled