IBM RS/6000 44P 270 Service Manual page 236

To change IP parameters, type the number of the parameters for which you want to
change the value.
Attention:
gateway IP address to [0.0.0.0].
Selecting the Adapter Parameters option allows you to view an adapter's hardware
address, as well as configure network adapters that require setup. A screen similar to
the following displays.
Device
1. ethernet
2. token-ring
3. ethernet
(Press enter after making selection)
218
Service Guide
If the client system and the server are on the same subnet, set the
Slot
3
5
Integrated
Hardware Address
0004AC5E08D2
0020357A0530
0004ACE4020B
.------.
|X=Exit|
`------'
===>