Selecting An Existing Workspace - Renesas H8 Series User Manual

4.1.3 Selecting an Existing Workspace

1. In the [Welcome!] dialog box that is displayed when the High-performance Embedded Workshop is activated,
select [Browse to another project workspace] radio button and click the [OK] button.
2. The [Open Workspace] dialog box is displayed. Select a directory in which you have created a workspace.
After that, select the workspace file (.hws) and press the [Open] button.
3. This activates the High-performance Embedded Workshop and recovers the state of the selected workspace
at the time it was saved.
When the saved state information of the selected workspace includes connection to the emulator, the
emulator will automatically be connected. To connect the emulator when the saved state information does not
include connection to the emulator, refer to section 4.2, Connecting the Emulator.
34
Figure 4.10 [Welcome!] Dialog Box
Figure 4.11 [Open Workspace] Dialog Box