Connecting The Emulator Mcu - Renesas M38000TL2-FPD User Manual

3.4 Connecting the Emulator MCU

There are following three methods to connect the emulator MCU and M38000TL2-FPD, so you can
choose the appropriate method depending on the type of an emulator MCU.
For methods (1) and (3), use the 28DP-WS board as the probe direction converter board; for method
(2), use the 32LCC-S board. Figures 3.3 and 3.4 show the top view of the 28DP-WS and that of the
32LCC-S, respectively.
Figure 3.3 External view of the 28DP-WS (included)
Figure 3.4 External view of the 32LCC-S (included)
(1) When the emulator MCU is an RSS or RLSS chip
(2) When the emulator MCU is an RFS or RLFS chip with screw-lock
(3) When the emulator MCU is an RFS or RLFS chip without screw-lock
( 23 / 54 )