Table of Contents
Advertisement
Firmware / Configuration Import
This section allows the user to upgrade to new firmware, import previously exported configurations and load ODP
applications and PEG scripts. Imports can be done over the local Ethernet connection or over the cellular network if
Remote Administration is enabled, allowing remote access to the Vanguard 3000 Web Interface and the Firmware
Update page.
Image
Enter the package file name or you may use the Choose File button to locate the file from your hard drive.
Import Image
After selecting the package filename above, press the Import Image button to begin the import process.
Note:
Firmware Update: the imported Firmware version has to be greater than the current running one.
Configuration Update: the imported Configuration version has to be lower or equal to the current running
one.
Upgrade Confirmation
After the package upload is completed, the Upgrade Confirmation will appear, displaying the uploaded file's Checksum
and Size.
If the package is a firmware upgrade, Apply Package Config will revert all setting to factory default. If the package is a
previously exported Configuration, Apply Package Config will be automatically checked.
Once the Proceed button is clicked, a non-reversable Firmware/Configuration update process is triggered. If the update
succeeds, a reboot will happen after. If the update fails, no reboot will happen and the failure reason will be logged.
Note: Do not manually reboot the device while the device is being updated.
Configuration Export
Current Configuration
Field to export the device configuration file. Clicking on the Export button will pop-up the browser's
Download/Save As dialog. The configuration file generated from this device can be imported to another device
to ease configuration effort.
The configuration file generated from this device can be imported to another device to ease configuration
effort.
Force Unit ID when Importing
Leave unchecked so that the unique per device Unit ID isn't over written when this configuration package is
imported. When checked, the value of Unit Status > Basic Settings > Unit ID > ID will be over written on import.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 85
Advertisement
Table of Contents
