Order Information; Mounting Brackets - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

1.5

ORDER INFORMATION

The following table shows the available order options and part numbers required for ordering Vanguard routers.
Table 2: Vanguard Router Order Information
Vanguard 3000
Vanguard 3000

1.5.1 MOUNTING BRACKETS

A mounting bracket is provided with each Vanguard 3000. The type of bracket provided is determined by the typical
mounting method for each application.

For fixed-location applications, a flat-plate bracket provides for low-profile, space-saving mounting.

For mobile applications, a U-shaped bracket is provided to allow mounting flexibility.
Table 3: Vanguard Mounting Brackets
Application
Fixed
Mobile
Four screws are provided with each bracket to fasten the bracket to the body of the Vanguard router.

Fixed — Four #6-32 × ¼ (3/16-inch thread length) clear-zinc plated stainless steel Philips undercut flat head
(82° countersink) screws are provided to fasten the flat-plate mounting bracket to the Vanguard chassis.

Mobile — Four #8-32 × ½ (3/8-inch thread length) black plated stainless steel slotted hex flange head cap
screws are provided to fasten the U-bracket at the sides of the Vanguard chassis for mounting.
Router
TM
Fixed
TM
Mobile
Bracket
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 5
Model Part Number
VG3000-PXS-F
VG3000-PXS-M
Part Number / Description
817-7010-500
Flat plate
(fastens to the top or bottom of
the Vanguard chassis)
817-2225-900
U-bracket
(fastens to the sides of Vanguard
chassis for top or bottom
mounting)