Ipsec - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

PTPP Server Configuration

PPTP Server
Selecting Enable starts the VPN server, and selecting Disable stops it.

Server Local IP
The IP address that clients will use to communicate with the server after they connect.

Client IP Range
The pool of IP addresses assigned to clients.

Protocols Allowed
Selecting a protocol will instruct the VPN server to accept clients who use that protocol. The server will reject
clients using any of the un-selected protocols.

Encryption
Selecting Use MPPE will enable Microsoft Point-to-Point Encryption for communication between the server
and clients. This option requires the MS-CHAP or MS-CHAPv2 protocol.
PPTP Server User Configuration

Full Name
This name can be used as a more descriptive name for a client. It is not used by the server. No spaces are
allowed in the name.

PAP/CHAP Username
The name used by a client to log in to the server.

PAP/CHAP Password
The password, with associated username, used by a client to log in to the server.
PPTP Server User Configuration Table
Displays list of user- configured PPTP servers user credentials.

Edit
Click Edit to edit the selected filter.

Delete
Click Delete to delete a filter.

3.6.3 IPSEC

IPsec serves to configure secured communication tunnels. The various tunnel configurations will be displayed in the
Tunnel Configuration Table. All tunnels are created using the ESP (Encapsulating Security Payload) protocol.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 52