CalAmp Vanguard 3000 VG3000-PXS-F User Manual page 37


Secondary IP Address
User may enter an accessible IP address or domain name that will respond to a ping command. This address
will be used if the entered number of consecutive ping failures using the first address is reached.

Interval
Time (in minutes) to wait between pings.

Fail Limit
Number of ping failures to accept before resetting the modem.
WAN Data Usage Statistics
This section tracks the data received from and transmitted to the cellular network. This is a tool that may be used to
estimate network usage. These totals are tracked by the router. Your carrier maintains separate statistics from which
your billing is determined. One way to use this tool is to track usage over a fairly short period of typical usage. The total
then can be extrapolated to estimate longer time periods. This router updates these statistics once approximately
every 30 seconds. Press the Clear button to reset the totals to 0.

Rx Bytes
The total number of bytes received by the modem from the cell network. All statistics will be cleared
automatically if this count exceeds 1 billion (1,000,000,000).

Rx Packets
The total number of TCP and UDP packets received by the modem from the cell network.

Rx Errors
The number of corrupted TCP and UDP packets received by the modem from the cell network.

Rx Packets Dropped
The number of TCP and UDP packets received by the modem from the cell network that were not accepted.
This may occur due to memory or throughput problems.

Tx Bytes
The total number of bytes transmitted by the modem to the cell network. All statistics will be cleared
automatically if this count exceeds 1 billion (1,000,000,000).

Tx Packets
The total number of TCP and UDP packets transmitted by the modem to the cell network.

Tx Errors
The number of corrupted TCP and UDP packets received by the modem that were meant to be transmitted on
the cell network.

Tx Packets Dropped
The number of TCP and UDP packets received by the modem for transmit to the cell network that were not
accepted. This may occur due to memory or throughput problems.
Click Clear WAN Statistics to reset the totals to 0. These totals are NOT cleared by a modem reboot.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 30