CalAmp Vanguard 3000 VG3000-PXS-F User Manual page 42

Vanguard 3000 series multicarrier 3g cellular broadband router
Table of Contents

Advertisement

Access Point
Active SSID
When Automatic is selected, a unique SSID will be provided. When Manual is selected, the user must
configure the SSID.
Automatic SSID
The automatic SSID is a unique SSID based off of the MAC address and is used when Automatic is selected for
the Active SSID.
Manual SSID
The user must configure the Manual SSID, and it is used when Manual is selected for the Active SSID.
Hide SSID
When checked, do not broadcast the SSID.
Authentication/Encryption
Type of authentication or encryption used. Extra fields may display depending on the selected type.
― Cipher: Type of Ciphers used for encryption. Used in WPA-PSK mode only.
― Key: In any WPA-PSK mode, this is a string that specifies the pre-shared passphrase from which the pre-
shared key will be derived. If a 64-character hexadecimal string is supplied, it will be used directly as the
pre-shared key instead. In WEP mode, this can be an integer specifying which key index to use (key1,
key2, key3, or key4.) Alternatively, it can be a string specifying a passphrase or key directly, as in key1.
IP Address
This sets the IP address for the WLAN side of the Vanguard unit.
Subnet Mask
Sets the subnet mask for the WLAN side of the Vanguard unit.
DNS Masquerade
DNS Auto
Selecting Enable will automatically set the preferred DNS Server to the WLAN IP address of the Vanguard.
Selecting Disable will allow the user to select the preferred and alternate DNS servers.
Domain Name Suffix
The DNS suffix to be assigned by the DHCP server.
Preferred DNS Server
IP address of the preferred DNS server.
Alternate DNS Server
IP address of the alternate DNS server.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vanguard 3000 vg3000-pxs-m

Table of Contents