Remote Admin - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

Maintenance Server

Server Address
This is the domain name or IP address of the Maintenance Server. The Client running in the unit uses this
address to perform ID report to the server, and unit firmware upgrade and configuration update from the
server.

Port
The UDP port number of the Maintenance Server that the Client uses to send all messages.
ID Report

ID Report
A periodic ID Report generated by the Client can be enabled or disabled using this option.

ID Report Frequency
If ID report generation is enabled, specify how often reports are to be generated by the Client.

Send ID Report after boot
Enable or Disable the ID Reporting after the router reboot.
Maintenance Server Comm Secure Settings

Use HTTPS
The HTTPS communication to the Maintenance Server can be enabled or disabled using this button.

3.11.3 REMOTE ADMIN

Figure 56: Admin — Remote Admin
This section allows you to enable various remote administration services and set their port numbers. Unless you have
a specific reason to change a port number, choose the default value when enabling a service.
 Enable HTTP
Enable remote administration via the standard (not secure) web server interface.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 82