Lan Settings - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

Vanguard 3000 series multicarrier 3g cellular broadband router

Table of Contents

3.2.5 OTHER SETTINGS

Figure 26: Other Settings



Special Address Filtering

Some traffic is not tolerated over the public internet. This feature will add filters to prevent such traffic to go

out the interface. (the following destination IP addresses will be discarded: 0.0.0.0/8, 192.0.0.0/24,

192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24, 192.168.0.0/16, 172.16.0.0/12, 10.0.0.0/8, 169.254.0.0/16,

224.0.0.0/4, 240.0.0.0/4).

3.3

LAN SETTINGS

Select LAN Settings from the main navigation pane for access to the LAN Settings tab.

Figure 27: LAN — LAN Settings

LAN Settings



Ethernet IP Address

This sets the IP address of this device and is the address used to access the configuration pages. If the IP

address changes you will have to re-enter the new IP address in your browser to access the configuration

pages. The default IP is 192.168.1.50 and should be changed for security purposes.



Ethernet Subnet Mask

Sets the subnet mask for the LAN side of the modem to the device.

Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 31

Table of Contents

Vanguard 3000 vg3000-pxs-m