Appendix B - Mechanical Specifications - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

APPENDIX B — MECHANICAL SPECIFICATIONS
Following figures show Vanguard 3000 standard and mobile models. Dimensions are shown for the unit alone and with
mounting brackets that allow them to be secured to any surface that can be drilled for this purpose. The drawings may
be used for layout reference, but it is advised that a physical comparison be made to the modem and bracket before
laying out and drilling mounting holes.
Table 21 Overall Dimensions, Vanguard 3000 standard and mobile
models
Dimension Inches
Height 1.90
Width 6.00
Depth 4.50 ± 0.04
Depth 4.28
(Chassis only)
Side tapped mounting hole location detail — typical both
sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm) depth
2 holes for mounting both sides (4 holes total).
Centimeters
4,83
15,2
11,4 ± 0,1
10,9
Base tapped mounting hole location detail — bottom of chassis. Same holes and
dimension on top of Chassis.
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for base mounting.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 100
Figure 66 Vanguard 3000 standard and mobile overall dimensions. Same mounting
holes (not shown) on bottom of Chassis.