Basic Settings - CalAmp Vanguard 3000 VG3000-PXS-F User Manual


Signal
Signal strength of AP.

Noise
The noise level indicates the amount of background noise in the environment.

RX Rate
Rx Rate is the rate at which packets are received from router.

TX Rate
TX Rate is the rate at which packets are sent from router.

3.1.3 BASIC SETTINGS

Figure 19: Unit Status — Basic Settings
Unit ID

ID
The identification string serves to distinguish this unit. It is also the TAIP identification for GPS reporting and
serves as the syslocation for the SNMP facility. Unit ID can be up to 32 characters long and can consist of
letters, digits and the underscore '_' character.
Power Management
Depending on power cabling, the Vanguard 3000 may stay ON regardless of whether the vehicle ignition is on. The unit
can be configured to automatically shut down 1, 5, 30, 60, 120 or 240 minutes after ignition has been turned off.
Leaving the unit live allows the driver to use the modem without idling the vehicle and defining a shut-off time limit
prevents the modem from draining the battery when the vehicle is unoccupied.

Ignition Enable
Disabled by default.

After Ignition Line Off
Select a time limit: 1, 5, 30, 60, 120, or 240 minutes.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 21