Rssi Traps - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

including the country code prefix. Select the button for a Sender (1-3), and then enter the address in the
adjacent field. If all three addresses are disabled, then commands will be accepted from ALL senders.

Respond only to Senders
For security, command responses, including error messages, can be restricted to be returned only to the
registered Sender SMS addresses.

Replace Country Code
This allows you to change the country that the responder uses, which can be useful when monitoring routers
across national borders.

With ... in responses
The string you wish to substitute for the country code.

3.9.2 RSSI TRAPS

Figure 46: Diagnostics — RSSI Traps
RSSI Traps
Generate SNMP traps and notifications when the cellular signal strength (RSSI) falls outside of specified thresholds.

RSSI Traps
Selecting Enable allows the monitoring of the cellular signal strength.

Low Threshold
Send an SNMP Trap message when the average RSSI falls below this value.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 69