Security; Status - CalAmp Vanguard 3000 VG3000-PXS-F User Manual


Radius Client:
Enabling this service will allow Vanguard to perform Radius Authentication for Vanguard login in IPP mode for
configured radius server and port.

ICMP Ping:
Enabling this service will allow incoming and outgoing ICMP traffic to redirect from/to Vanguard to/from
WAN for all destination/source.
LOCAL SERVICE S

Name:
Name of the service accessible on LAN interface.

Enabled:
Check the checkbox if a Local service is to be enabled over LAN. By default except DHCP, ICMP, outgoing
HTTP, IO Manager and GPS Manager clients all the traffic is blocked on LAN.
Enabling a local service will allow selected traffic to be ACCEPTed on LAN.

Local HTTP:
Enabling this service will allow LAN HTTP client to connect to Vanguard in IPP mode on configured port.

Local HTTPS:
Enabling this service will allow LAN HTTPS client to connect to Vanguard in IPP mode on configured port.

Local CLI:
Enabling this service will allow LAN CLI client to connect to Vanguard in IPP mode on configured port.

Local Syslog:
Enabling this service will allow Vanguard to send syslog on configured server and configured port on LAN.

Local SNMP:
Enabling this service will allow LAN SNMP client to connect to Vanguard in IPP mode on configured port.

Local SSH:
Enabling this service will allow LAN SSH client to connect to Vanguard in IPP mode on configured port.
3.6

SECURITY

From the main navigation pane, select Security to access the PPTP, IPsec and GRE tabs.

3.6.1 STATUS

Figure 37: Security — Status
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 49