Table of Contents
Advertisement
-
Remote (AAVL): Select this to have the Remote report sent out the serial port. The report rate is based on
the AAVL settings.
External PAD Configuration
The mode selection configures the service to listen on configured TCP or UDP port or connect to an external host as a
TCP client.
Mode
The TCP server and UDP modes will listen on the configured port for connections from the Friendly IP address.
The TCP client will attempt to connect to the configured Remote IP address on the Remote Port.
Friendly/Remote IP Address
TCP/UDP Server: Sets the IP address of the client that is allowed to connect to the PAD service.
TCP Client: The remote host address.
Service/Remote Port
The port number exposed on the WAN/LAN interface for the serial PAD service (UDP/TCP server) or the
remote host port for TCP client mode.
Inactivity/Respawn Timeout
Time after which the current connection with Client will be terminated without warning. This time starts over
again each time the Client sends data to the server. The timeout is between 1-120 seconds. Enter 0 for no
timeout.
Log
When enabled, as data passes through the PAD, a copy is stored in an internal log file.
Log Type
Exposed when Log is enabled,provides the option of logging characters in either ASCII or Hex.
PAD Log
If PAD Log is enabled, the current log can be displayed from this tab.
3.8
GPS/GNSS
The Mobile model Vanguard Cellular Broadband Router contains a standalone, high-accuracy, high-report-rate GPS
receiver.
The GPS LED on the front panel provides the status of the receiver.
Table 17: GPS LED Color State and GPS Status
GPS LED Color / State
Off
Amber
Green
GPS is not installed or cell modem GPS is disabled.
Acquiring GPS position.
Valid positions being reported.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 61
Meaning
Advertisement
Table of Contents
