Remote Server App - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

3.11.2 REMOTE SERVER APP

The Remote/Cloud Server Applications config page can be used to configure the built-in CalAmp Remote/Cloud Server
and Client applications.

The Client is built in the unit, and can be enabled/disabled.

The Remote/Cloud Primary Server is used for event reporting and can be empty if there's no event reporting
server.

The Remote/Cloud Maintenance Server is used for ID report, unit firmware upgrade and configuration update.
The Maintenance Server cannot be empty once this Remote Server Applications feature is enabled.
Figure 55: Admin — Remote Server App
Remote Server Applications

Remote Server Applications
The Client for Remote Server Applications can be enabled or disabled using this button.

Version
Displays the version of Client currently running in the unit.

Port
The UDP port number on which the Client listens. The default UDP port used is 20510.
Primary Server

Primary Server
This is the domain name or IP address of the Primary Server. The Client running in the unit uses this address to
report event to the server.

Port
The UDP port number of the Primary Server that the Client uses to send all messages.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 81