Table of Contents
Advertisement
3.4.2 ACCESS POINT
Figure 29: WLAN — Access Point
Wireless Devices
Wireless Mode
The channel to be used in the Access Point mode. The Auto option attempts to scan for the "least busy"
channel (which may change over time). If the Vanguard does not select a channel after a short period of time,
CalAmp recommends that a specific channel be chosen and saved.
Table 11: Explanation of Wireless Mode options
Mode
Disable
The WLAN interface is disabled.
Access Point
The WLAN interface operates in Access Point mode. Parameters can be set on the Access Point tab.
Client
The WLAN interface operates in Client mode. Parameters can be set on the Client tab.
Channel
The channel to be used in the Access Point mode.
Network Mode:
Switches network mode between 802.11n and 802.11g. WPA2 + CCMP must be selected for 802.11n
throughput.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 34
Explanation
Advertisement
Table of Contents
