CalAmp Vanguard 3000 VG3000-PXS-F User Manual page 55

Notes:
Change in router mode from IP Passthrough to non-IP Passthrough or vice versa is Service Affecting and
causes the IMMEDIATE Reboot of the device. Configuration change in IP Passthrough mode will not be carried
over when the router mode is switched back to non-IP Passthrough mode.
Change in Automatic Subnet value will take effect in the next IP allocation on WAN.
PINHOLE SERVICES

Name:
Name of the Pinhole service.

Enabled:
Check the checkbox if a Pinhole service is to be enabled otherwise the Pinhole service will be disabled.
Enabling a Pinhole service redirects the respective incoming traffic to Vanguard, though it has destination IP
as WAN IP which is allocated to Ethernet device.
Also outgoing traffic from Vanguard of respective services would have source IP as WAN IP to enable its
routing on WAN, though WAN IP is possessed by Ethernet device.
Note:
Enabling a pinhole service would require its related configuration to be enabled from other configuration
screens. e.g. Enabling the Remote HTTPS pinhole service would still require Remote HTTPS to be enabled from
Remote Admin screen to make it work end-to-end.

NTP Client:
Enabling this service will allow NTP traffic redirect to configured NTP server on port 123 from Vanguard in IPP
mode.

Serial2NET:
Enabling this service will allow Ext-PAD traffic redirect to Vanguard on its configured Ext-PAD TCP/UDP port in
IPP mode.

IO Stream:
Enabling this service will allow IO Manager connectivity from/to WAN to/from Vanguard over configured IO
Agent Port in IPP mode.

Device Outlook:
Enabling this service will allow DO connectivity of Vanguard to configured DO server in IPP mode.

Remote HTTP:
Enabling this service will allow remote HTTP client to connect to Vanguard from WAN in IPP mode on
configured port.

Remote HTTPS:
Enabling this service will allow remote HTTPS client to connect to Vanguard from WAN in IPP mode on
configured port.

Remote SSH:
Enabling this service will allow remote SSH client to connect to Vanguard from WAN in IPP mode on
configured port.

Remote CLI:
Enabling this service will allow remote CLI client to connect to Vanguard from WAN in IPP mode on configured
port.

Remote SNMP:
Enabling this service will allow remote SNMP client to connect to Vanguard from WAN in IPP mode on
configured port.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 48