Pptp - CalAmp Vanguard 3000 VG3000-PXS-F User Manual

3.6.2 PPTP

The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks (VPN).
Figure 38: Security — PPTP
PPTP Client Configuration

PPTP Client
Selecting Enable will allow the PPTP functionality. Selecting Disable will shut off PPTP functionality.

Set Default Route to PPTP
Selecting Enable will route all IP traffic through the PPTP network. Selecting Disable will route only PPTP traffic
through the PPTP network.

PPTP Server
The IP address of the virtual private network server on which to connect.

Username
The username required by the VPN server.

Password
The password, associated with the username, required by the VPN server.

Encryption
Selecting Use MPPE will enable Microsoft Point-to-Point Encryption for communication between the server
and clients. This option requires the MS-CHAP or MS-CHAPv2 protocol.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 51