Table of Contents
Advertisement
NMEA Sentences
This section displays all NMEA Sentence Lists currently present.
Add
You can add a new NMEA Sentence List by entering a unique name, and then clicking the Add button.
3.9
DIAGNOSTICS
From the main navigation pane, select Diagnostics for access to the SMS, RSSI Traps and Logging configuration pages.
3.9.1 SMS
The SMS CLI (Command-Line Interface) allows a small set of commands to be sent to the Vanguard 3000 using SMS.
Figure 45: Diagnostics —SMS
All commands are prefixed with the slash "/" character. Note that [...] denotes an optional field (don't type the square
brackets). The supported commands are:
/status pw=[password]
Returns the following fields:
WAN= DOWN or the IP address of the cellular connection
RSSI= the signal strength of the cellular radio channel
ECIO= the interference on the cellular radio channel
PPTP= the state of the PPTP VPN: UP or DOWN
IPSEC= the number of active / enabled / defined tunnels
GPS= the latitude, longitude (in decimal degrees) of the modem
V= the main voltage of the modem
T= the temperature of the modem
D1=, D2= the state of the two digital inputs: 0 (inactive) or 1 (active)
A1=, A2= the levels of the two analog inputs, in volts
R1=, R2= the state of the two digital (historically called "relay") outputs: 0 (ground) or 1 (open)
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 67
Advertisement
Table of Contents
