YASKAWA MOTOMAN-DX100 Instructions Manual page 5

156191-1CD
DX100
Definition of Terms Used Often in This Manual
• Perform the following inspection procedures prior to conducting
manipulator teaching. If problems are found, repair them
immediately, and be sure that all other necessary processing has
been performed.
– Check for problems in manipulator movement.
– Check for damage to insulation and sheathing of external wires.
• Always return the programming pendant to the hook on the DX100
cabinet after use.
• The programming pendant can be damaged if it is left in the
manipulator's work area, on the floor, or near fixtures.
• Read and understand the Explanation of the Warning Labels in the
DX100 Instructions before operating the manipulator.
The MOTOMAN manipulator is the YASKAWA industrial robot product.
The MOTOMAN usually consists of the controller, the programming
pendant, and supply cables.
In this manual, the equipment is designated as follows.
Equipment
DX100 Controller
DX100 Programming Pendant
Cable between the manipulator and the
controller
v
CAUTION
Manual Designation
DX100
Programming Pendant
Manipulator cable
HW0482494
5/63