Configure Routing Information Protocol - NETGEAR UTM5 Reference Manual

Configure Routing Information Protocol

Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks (LANs). RIP enables a router to exchange its routing
information automatically with other routers, to dynamically adjust its routing tables, and to
adapt to changes in the network. RIP is disabled by default.

To enable and configure RIP:
1. Select Network Config > Routing.
2. Click the RIP Configuration option arrow to the right of the Routing submenu tab. The RIP
Configuration screen displays:
Figure 63.
ProSecure Unified Threat Management (UTM) Appliance
LAN Configuration
117