NETGEAR UTM5 Reference Manual page 435

Prosecure unified threat management appliance

Hide thumbs Also See for UTM5:

Table of Contents

To monitor traffic limits on each of the WAN ports:

Select Network Config > WAN Metering. On the multiple WAN port models, the WAN

Metering tabs display, with the WAN1 Traffic Meter screen (or, for the UTM9S, the

WAN1) screen in view (the following figure shows the WAN1 Traffic Meter screen of the

UTM50). On the single WAN port models, the WAN Traffic Meter screen displays.

The Internet Traffic Statistics section in the lower part of the screen displays statistics on

Internet traffic through the WAN port. If you have not enabled the traffic meter, these

statistics are not available.

Enter the settings as explained in the following table:

ProSecure Unified Threat Management (UTM) Appliance

Monitoring System Access and Performance

Troubleshooting

Utm9s Utm10 Utm150 Utm25 Utm50