NETGEAR UTM5 Reference Manual page 338


To create a new SSL VPN portal layout:
1. Select VPN > SSL VPN > Portal Layouts. The Portal Layouts screen displays. (The
following figure shows layouts in the List of Layouts table as an example. The IP
addresses that are shown in this figure do not relate to other figures and examples in
this manual. The portal URL normally includes the WAN IP address of the UTM.)
Figure 207.
The List of Layouts table displays the following fields:
• Layout Name. The descriptive name of the portal.
• Description. The banner message that is displayed at the top of the portal (see
Figure 202
• Use Count. The number of remote users that are currently using the portal.
• Portal URL. The URL at which the portal can be accessed.
• Action. The table buttons, which allow you to edit the portal layout or set it as the
default.
2. Under the List of Layouts table, click the Add table button. The Add Portal Layout screen
displays. (The following figure shows an example.)
ProSecure Unified Threat Management (UTM) Appliance
on page 333).
Virtual Private Networking Using SSL Connections
338