NETGEAR UTM5 Reference Manual page 69

ProSecure Unified Threat Management (UTM) Appliance
Table 13. Internet connection methods
Connection method Manual data input required
DHCP (Dynamic IP)
PPPoE
PPTP
Fixed (Static) IP
• If the autodetect process does not find a connection, you are prompted either to
check the physical connection between your UTM and the cable, DSL line, satellite
dish, or wireless ISP radio antenna to check your UTM's MAC address. For more
information, see
ISP Connection
4. To verify the connection:
a. Return to the WAN screen by selecting Network Config > WAN Settings.
b. Click the Status button in the Action column for the WAN interface that you just
configured to display the Connection Status pop-up screen.
Figure 38.
The Connection Status screen should show a valid IP address and gateway. If the
configuration was not successful, skip ahead to
Connection on page 70, or see
No data is required.
Login, password, account name, and domain name.
Login, password, account name, your IP address, and the server IP address.
IP address, subnet mask, and gateway IP address, and related data supplied
by your ISP.
Configure Advanced WAN Options
on page 511.
Troubleshoot the ISP Connection
Manually Configuring Internet and WAN Settings
69
on page 89 and
Manually Configure the Internet
on page 511.
Troubleshoot the