NETGEAR UTM5 Reference Manual page 4

ProSecure Unified Threat Management (UTM) Appliance
202-10674-02 1.0
202-10674-01 1.0
202-10482-03 1.0
202-10482-02 1.0
202-10482-01 1.0
March 2011 • Addition of the UTM150.
• Removal of platform-specific chapters and sections because
the UTM5, UTM10, and UTM25 now support the same web
management interface menu layout that was already
supported on the UTM50. The major changes for the UTM5,
UTM10, and UTM25 are documented in
Configuring Internet and WAN
sections:
- Set Exception Rules for Web and Application Access
- Configure Authentication Domains, Groups, and Users
• Added new features (for all UTM models). The major new
features are documented in the following sections:
- Electronic Licensing
- VLAN Rules
- Create Service Groups
- Create IP Groups
- Manage Digital Certificates for HTTPS Scans
- Update the Firmware
- View, Schedule, and Generate Reports
September 2010 • Addition of the UTM50 and UTM50-specific chapters and
sections.
• Revision of DMZ WAN and LAN DMZ default policies.
May 2010 • Applied numerous nontechnical edits.
• Added the
• Added a note about the processing of normal email traffic in
the Configure Distributed Spam Analysis
• Updated the
January 2010 Updated the web management interface screens, made the
manual platform-independent, added a model comparison table,
and removed performance specifications (see marketing
documentation for such specifications).
September 2009 Initial publication of this reference manual.
Settings, and in the following
Requirements for Entering IP Addresses
NTP section.
4
Chapter 3, Manually
section.
section.