NETGEAR UTM5 Reference Manual page 164

ProSecure Unified Threat Management (UTM) Appliance
2. Under the List of Bandwidth Profiles table, click the Add table button. The Add Bandwidth
Profile screen displays:
Figure 94.
3. Enter the settings as explained in the following table:
Table 34. Add Bandwidth Profile screen settings
Setting
Profile Name
Direction
Outbound Minimum
Bandwidth
Outbound Maximum
Bandwidth
Inbound Minimum
Bandwidth
Inbound Maximum
Bandwidth
Description
A descriptive name of the bandwidth profile for identification and management
purposes.
From the Direction drop-down list, select the traffic direction for the bandwidth profile:
• Outbound Traffic. The bandwidth profile is applied only to outbound traffic.
Specify the outbound minimum and maximum bandwidths.
• Inbound Traffic. The bandwidth profile is applied only to inbound traffic. Specify
the inbound minimum and maximum bandwidths.
• Both. The bandwidth profile is applied to both outbound and inbound traffic.
Specify both the outbound and inbound minimum and maximum bandwidths.
The outbound minimum allocated bandwidth in Kbps. The default setting is 0 Kbps.
The outbound maximum allowed bandwidth in Kbps. The default setting is 100 Kbps
(you cannot configure less than 100 Kbps); the maximum allowable bandwidth is
100,000 Kbps.
The inbound minimum allocated bandwidth in Kbps. The default setting is 0 Kbps.
The inbound maximum allowed bandwidth in Kbps. The default setting is 100 Kbps
(you cannot configure less than 100 Kbps); the maximum allowable bandwidth is
100,000 Kbps.
Firewall Protection
164