NETGEAR UTM5 Reference Manual page 133

LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is
blocked. Remember that allowing inbound services opens potential security holes in your
firewall. Enable only those ports that are necessary for your network.

To create a new inbound LAN WAN service rule:
1. In the LAN WAN Rules screen, click the Add table button under the Inbound Services
table. The Add LAN WAN Inbound Service screen displays:
Figure 67.
2. Enter the settings as explained in
3. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.
ProSecure Unified Threat Management (UTM) Appliance
Table 28
Firewall Protection
on page 127.
133