NETGEAR UTM5 Reference Manual page 527

ProSecure Unified Threat Management (UTM) Appliance
Table 137. Internet IP address settings
Setting Description
Get Dynamically If your ISP has not assigned you a static IP address, select the Get Dynamically from
from ISP ISP radio button. The ISP automatically assigns an IP address to the UTM9S using
DHCP network protocol.
Use Static IP If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Address Static IP Address radio button, and enter the following settings:
IP Address
Subnet Mask
Gateway IP Address
Use IP Over If your ISP uses IP over ATM (IPoA), select the Use IP Over ATM (IPOA) radio button,
ATM (IPOA) and enter the following settings:
IP Address
Subnet Mask
Gateway IP Address
8. In the Domain Name Server (DNS) Servers section of the screen (see the following figure),
specify the DNS settings as explained in the following table.
Figure 312.
Static IP address assigned to you. This address identifies the
UTM9S to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
The IP address assigned to you. This address identifies the
UTM9S to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
xDSL Module for the UTM9S
527