Configure Advanced Wan Options - NETGEAR UTM5 Reference Manual

3. Click the Information option arrow in the upper right of a DNS screen for registration
information.
Figure 320.
4. Access the website of the DDNS service provider, and register for an account (for example,
for DynDNS.org, go to http://www.dyndns.com/).
5. Configure the DDNS service settings for the DSL interface as explained in the following
table:
Table 141. DNS service settings
Setting
SLOT-x (Dynamic DNS Status: ...)
Change DNS to
(DynDNS, TZO,
Oray, or 3322)
6. Click Apply to save your configuration.

Configure Advanced WAN Options

The advanced options include configuring the maximum transmission unit (MTU) size, the
port speed, and the UTM9S's MAC address, and setting a rate limit on the traffic that is being
forwarded by the UTM9S.
ProSecure Unified Threat Management (UTM) Appliance
Description
Select the Yes radio button to enable the DDNS service. The fields that display onscreen
depend on the DDNS service provider that you have selected. Enter the following
settings:
Host and Domain Name
Username or
User Email Address
Password or User Key
Use wildcards
Update every 30 days
xDSL Module for the UTM9S
The host and domain name for the DDNS service.
The user name or email address for DDNS server
authentication.
The password that is used for DDNS server authentication.
If your DDNS provider allows the use of wildcards in resolving
your URL, you can select the Use wildcards check box to
activate this feature. For example, the wildcard feature
causes *.yourhost.dyndns.org to be aliased to the same IP
address as yourhost.dyndns.org.
If your WAN IP address does not change often, you might
need to force a periodic update to the DDNS service to
prevent your account from expiring. If the Update every 30
days check box displays, select it to enable a periodic
update.
541