NETGEAR UTM5 Reference Manual page 371

Table 94. Add Domain screen settings (continued)
Setting
Repeat
Timeout
4. Click Apply to save your settings. The domain is added to the List of Domains table.
5. If you use local authentication, make sure that it is not disabled: in the Local Authentication
section of the Domain screen (see
Note: A combination of local and external authentication is supported.
WARNING:
If you disable local authentication, make sure that there is at least
one external administrative user; otherwise, access to the UTM is
blocked.
6. If you change local authentication, click Apply in the Domain screen to save your settings.

To delete one or more domains:
1. In the List of Domains table, select the check box to the left of each domain that you
want to delete, or click the Select All table button to select all domains. You cannot
delete a default domain.
2. Click the Delete table button.
Edit Domains

To edit a domain:
1. Select Users > Domains. The Domains screen displays (see
2. In the Action column of the List of Domains table, click the Edit table button for the domain
that you want to edit. The Edit Domains screen displays. This screen is very similar to the
Add Domains screen (see the previous figure).
3. Modify the settings as explained in the previous table. (You cannot modify the Domain Name
and Authentication Type fields.)
4. Click Apply to save your changes. The modified domain is displayed in the List of Domains
table.
ProSecure Unified Threat Management (UTM) Appliance
Description
The period in seconds that the UTM waits for a response from a RADIUS server.
The maximum number of times that the UTM attempts to connect to a RADIUS
server.
Figure 222
Managing Users, Authentication, and VPN Certificates
on page 366), select the No radio button.
371
Figure 222 on page 366).