NETGEAR UTM5 Reference Manual page 100

ProSecure Unified Threat Management (UTM) Appliance
Table 21. Edit VLAN Profile screen settings (continued)
Setting
Enable DHCP Server
DHCP Relay
Description
Select the Enable DHCP Server radio button to enable the UTM to function as a
Dynamic Host Configuration Protocol (DHCP) server, providing TCP/IP
configuration for all computers connected to the VLAN. Enter the following
settings:
Domain Name This setting is optional. Enter the domain name of the UTM.
Starting IP Enter the starting IP address. This address specifies the first
Address of the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between this address and the ending IP address. The IP
address 192.168.1.2 is the default starting address.
Ending IP Enter the ending IP address. This address specifies the last
Address of the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between the starting IP address and this IP address. The IP
address 192.168.1.100 is the default ending address.
Note:
be in the same network as the LAN TCP/IP address of the
UTM (that is, the IP address in the LAN TCP/IP Setup section
as described earlier in this table).
Primary DNS This setting is optional. If an IP address is specified, the UTM
Server provides this address as the primary DNS server IP address.
If no address is specified, the UTM uses the VLAN IP
address as the primary DNS server IP address.
Secondary DNS This setting is optional. If an IP address is specified, the UTM
Server provides this address as the secondary DNS server IP
address.
WINS Server This setting is optional. Enter a WINS server IP address to
specify the Windows NetBIOS server, if one is present in your
network.
Lease Time Enter a lease time. This specifies the duration for which IP
addresses are leased to clients.
To use the UTM as a DHCP relay agent for a DHCP server somewhere else in
your network, select the DHCP Relay radio button. Enter the following setting:
Relay Gateway The IP address of the DHCP server for which the UTM
serves as a relay.
LAN Configuration
100
The starting and ending DHCP IP addresses should