NETGEAR UTM5 Reference Manual page 71

ProSecure Unified Threat Management (UTM) Appliance
Figure 39.
In the ISP Login section, select one of the following options:
• If your ISP requires an initial login to establish an Internet connection, select Yes.
(The default is No.)
• If a login is not required, select No, and ignore the Login and Password fields.
4. If you selected Yes, enter the login name in the Login field and the password in the
Password field. This information is provided by your ISP.
5. In the ISP Type section of the screen, select the type of ISP connection that you use from
the two listed options. By default, Other (PPPoE) is selected, as shown in the following
figure:
Figure 40.
Manually Configuring Internet and WAN Settings
71