Set Up Address Reservation - NETGEAR UTM5 Reference Manual

ProSecure Unified Threat Management (UTM) Appliance
Figure 59.
3. Select the radio button next to the group name that you want to edit.
4. Type a new name in the field. The maximum number of characters is 15; spaces and double
quotes (") are not allowed.
5. Repeat Step 3 and
6. Click Apply to save your settings.

Set Up Address Reservation

When you specify a reserved IP address for a PC or device on the LAN (based on the MAC
address of the device), that PC or device always receives the same IP address each time it
accesses the UTM's DHCP server. Reserved IP addresses should be assigned to servers or
access points that require permanent IP address settings. The reserved IP address that you
select needs to be outside of the DHCP server pool.
To reserve an IP address, select Reserved (DHCP Client) from the IP Address Type
drop-down list on the LAN Groups screen as described in
Database on page 108 or on the Edit Groups and Hosts screen as described in
Devices in the Network Database
Note: The reserved address is not assigned until the next time the PC or
device contacts the UTM's DHCP server. Reboot the PC or device,
or access its IP configuration and force a DHCP release and renew.
Step 4 for any other group names.
on page 108.
LAN Configuration
110
Add PCs or Devices to the Network
Edit PCs or