Configure And Activate System, Email, And Syslog Logs - NETGEAR UTM5 Reference Manual

ProSecure Unified Threat Management (UTM) Appliance
Figure 262.
6. Enter the settings as explained in the following table:
Table 109. Email Notification screen settings
Setting
Show as Mail Sender
SMTP Server
This server requires authentication
Send Notifications to Admin
7. Click Test to ensure that the connection to the server and email address succeeds.
8. Click Apply to save your settings.

Configure and Activate System, Email, and Syslog Logs

You can configure the UTM to log system events such as a change of time by an NTP server,
secure login attempts, reboots, and other events. You can also send logs to the administrator
Description
A descriptive name of the sender for email identification purposes.
For example, enter UTMnotification@netgear.com.
The IP address and port number or Internet name and port number of
your ISP's outgoing email SMTP server. The default port number
is 25.
Note: If you leave this field blank, the UTM cannot send email
notifications.
If the SMTP server requires authentication, select the This server
requires authentication check box, and enter the user name and
password.
User Name
Password
The email address to which the notifications should be sent. Typically,
this is the email address of the administrator.
Monitoring System Access and Performance
439
The user name for SMTP server authentication.
The password for SMTP server authentication.