NETGEAR UTM5 Reference Manual page 494

ProSecure Unified Threat Management (UTM) Appliance
Table 130. Report screen: filtering options settings (continued)
Setting
Destination
Count
Chart Type
3. The next steps depends on whether you want to view the report on screen or schedule it to
be emailed:
• Viewing onscreen. To view a filtered report onscreen, select a report by clicking View
next to the report. (For more information, see the following section.) To save the
configured filtering options for future use, click Apply at the bottom of the Report
screen.
• Scheduling to be emailed. To save the configured filtering options to use them to
schedule a filtered report that can be emailed, click Apply at the bottom of the Report
screen, and then follow the procedure in
page 500.
Description
You can narrow down the reports to a single domain (wildcards are not
applicable), a single IP address, a single category, or a selection of categories.
Specifying a destination affects the following reports in the Web Activity section:
• Top n Domain by Bandwidth
• Top n Category by Bandwidth
• Top n Blocked Domains
• Top n Blocked Categories
• Top n Domains By Request
• Top n Categories By Request
• Top n Domains by Session Time
• Top n Categories by Session Time
Domain Enter a URL or an IP address in the field next to Domain. The
report is restricted to the specified URL.
Category Select one or more web categories from the drop-down list next to
Category. The report is restricted to the selected category or
categories.
When you select Category from the drop-down list, you also have
the option to select the Exclude selected Categories check box,
which allows you to run a report from which the selected category
or categories are excluded.
Enter a number between 1 and 10 to specify how many entries are included in
reports that provide a top count, such as the Top n(umber of) Blocked Domain
report or the Top n(umber of) Infected Clients report.
The default number is 10, which means that a maximum of 10 domains are
included in the Top n Blocked Domain report and a maximum of 10 clients are
included in the Top n Infected Clients report, for example.
Specify the type of chart that is generated in the report by making one of the
following selections from the drop-down list:
• Horizontal Bar.
• Pie.
• Vertical Bar. This is the default selection.
Monitoring System Access and Performance
494
Schedule, Email, and Manage Reports on