NETGEAR UTM5 Reference Manual page 373

Figure 224.
2. In the Add New Group section of the screen, enter the settings as explained in the following
table:
Table 95. Groups screen settings
Setting
Name
Domain
Idle Timeout
3. Click the Add table button. The new group is added to the List of Groups table.

To delete one or more groups:
1. In the List of Groups table, select the check box to the left of each group that you want
to delete, or click the Select All table button to select all groups.
2. Click the Delete table button.
ProSecure Unified Threat Management (UTM) Appliance
Description
A descriptive (alphanumeric) name of the group for identification and management
purposes.
The drop-down list shows the domains that are listed on the Domain screen. From the
drop-down list, select the domain with which the group is associated. For information
about how to configure domains, see
The period after which an idle user is automatically logged out of the UTM's web
management interface. The default idle time-out period is 5 minutes.
Managing Users, Authentication, and VPN Certificates
Configure Domains
373
on page 365.