Monitor Application Use In Real-Time - NETGEAR UTM5 Reference Manual

Table 115. Dashboard screen: service statistics information (continued)
Item
Total Spam Emails

Monitor Application Use in Real-Time

If you have enabled application session monitoring (see
Monitoring on page 492), the Application Dashboard screen lets you monitor the use of
applications and protocols in real-time. To display the Application Dashboard screen, select
Monitoring > Application Dashboard.
Except for setting the poll interval, changing the monitoring period, and selecting the filter,
you cannot configure the fields on the Dashboard screen. Any changes need to be made on
other screens.
You can sort the fields of the table below the graphics, which will affect the displayed
graphics, and you can display application details onscreen by clicking a View table button in
the Details column. Move the cursor over the graphics to display additional information.
Note: Adobe Flash Player 10 or later is required to display the graphics.
ProSecure Unified Threat Management (UTM) Appliance
Description
The total number of spam messages that were blocked. These statistics are
applicable only to SMTP and POP3.
Blacklist The total number of emails that were detected from sources on
the spam blacklist (see
page 194). These statistics are applicable only to SMTP and
POP3.
RBL The total number of emails that were detected from sources on
the real-time blacklist (see
page 196). These statistics are applicable only to SMTP.
Distributed Spam The total number of spam messages that were detected through
Analysis distributed spam analysis (see
Analysis
SMTP and POP3.
Monitoring System Access and Performance
Set Up the Whitelist and Blacklist
Configure the Real-Time Blacklist
on page 198). These statistics are applicable only to
Enable Application Session
455
on
Configure Distributed Spam
on