NETGEAR UTM5 Reference Manual page 462

Figure 272.
The following table explains the fields of the Router Statistics screen.
To change the poll interval period, enter a new value in the Poll Interval field, and then
click Set interval. To stop polling, click Stop.
Table 119. Router Statistics screen fields
Item
System up Time. The period since the last time that the UTM was started up.
Router Statistics
For each of the WAN interfaces, for the DSL interface (UTM9S only, not shown on the previous figure), and
for all LAN interfaces combined, the following statistics are displayed:
Tx Pkts
Rx Pxts
Collisions
Tx B/s
Rx B/s
Up Time
View the Wireless Statistics Screen (UTM9S Only)

To view the Wireless Statistics screen:
1. Select Monitoring > System Status > Network Status. The Network Status screen
displays.
2. Click the Wireless Statistics option arrow in the upper right of the Network Status screen.
The Wireless Statistics screen displays:
ProSecure Unified Threat Management (UTM) Appliance
Description
The number of packets transmitted on the port in bytes.
The number of packets received on the port in bytes.
The number of signal collisions that have occurred on the port. A collision occurs
when the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
The number of bytes transmitted per second on the port.
The number of bytes received per second on the port.
The period that the port has been active since it was restarted.
Monitoring System Access and Performance
462