Restore And Default; Upgrade; Device Auto Maintenance - HIKVISION DS-2CD3956G2-IS(U) User Manual

Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Reboot.

2.9.7 Restore and Default

Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Click Restore or Default according to your needs.
Restore Reset device parameters, except user information, IP parameters and video format
to the default settings.
Default Reset all the parameters to the factory default.
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.

2.9.8 Upgrade

Before You Start
You need to obtain the correct upgrade package.
Caution
DO NOT disconnect power during the process, and the device reboots automatically after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Choose one method to upgrade.
Firmware
Firmware Directory Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.

2.9.9 Device Auto Maintenance

Steps
1. Check Enable Auto Maintenance.
2. Read the prompt information and click OK.
3. Select the date and time you want to restart the device.
4. Click Save.
Network Camera User Manual
Note
Locate the exact path of the upgrade file.
65