Table of Contents
Advertisement
7.1.3 Configuring PPPoE Settings
Steps:
1.
Enter the PPPoE Settings interface: Configuration > Network > Basic
Settings > PPPoE
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in order to
increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4. Click Save to save and exit the interface.
Note:
A reboot is required for the settings to take effect.
7.1.4 Configuring Port Settings
Purpose:
Network Camera User Manual
Figure 7-4 PPPoE Settings
55
Advertisement
Table of Contents
