Table of Contents
Advertisement
6. Click Save to save the settings.
10.1.4 Configuring Alarm Output
Steps:
1. Enter the Alarm Output Settings interface: Configuration> Event > Basic
Event > Alarm Output.
2. Select one alarm output channel in the Alarm Output drop-down list. You can
also set a name for the alarm output (optional).
3. The Delay time can be set to 1 sec, 2 sec, 3 sec, 4 sec, 5sec, 10sec, 30sec, 1min,
2min, 5min, 10min or Manual. The delay time refers to the time duration that the
alarm output remains in effect after alarm occurs.
4. Click Arming Schedule to enter the Edit Schedule Time interface. The time
schedule configuration is the same as the settings of the arming schedule for
motion detection Refer to Task 2: Set the Arming Schedule for Motion Detection
in Section 10.1.1.
Network Camera User Manual
Figure 10-9 Alarm Output Settings
98
Advertisement
Table of Contents
