[F174(Sp0H)] Pulse Output (Selectable Data Table Control Operation)7-21 - Panasonic FP0H User Manual

7.2.4 [F174(SP0H)] Pulse Output (Selectable Data Table Control Operation)
Outputs pulses from a specified pulse output channel according to a specified data table.
 Instruction format
R0
DF
（ ）
 Operand
Operand Settings
S Starting number of the area in which data tables are registered
n Target channel for pulse output
 Memory area type that can be specified
Operand WX WY
S -
n -
 Outline of operation
• Outputs pulses from a specified channel according to the settings specified in the data table
starting with the address specified by [S] when a corresponding control active flag is OFF
and the execution condition is ON.
• Switches the pulse frequency when the elapsed value of the high-speed counter reaches the
target value set in the data table. (It is performed by the interrupt processing.)
• Stops the pulse output when the elapsed value reaches the final target value.
• For setting the frequency to 50 kHz or more, specify the duty of 1/4 (25%).
7.2 FP Compatible Instruction Mode Control Instruction
F174 SP0H
WR WL SV
- - - -
- - - -
S n
EV DT LD I
- A - -
- - - -
Constant
Index
modifier
K H
- - A
A A -
7-21