Display; Notifications - Logicube Falcon-NEO User Manual

5.10.5 Display

Brightness – The Falcon-NEO's screen's brightness may need to be adjusted,
depending on the user's preference. To adjust the brightness, use the left or right
arrow icons on the screen. The screen's brightness will adjust accordingly.
Stealth Mode – Stealth mode turns the Falcon-NEO's screen off, allowing privacy
so no one can see what the Falcon-NEO is doing. When Stealth mode is
activated, currently running operations continue to run.
To turn Stealth mode on, tap ON.
To turn Stealth mode off and restore the Falcon-NEO's display, tap anywhere on
the screen.

5.10.6 Notifications

To access the Notifications tab in the System Settings screen, tap the right
navigation arrow below the Falcon-NEO logo (located on the top-right of the
screen):
The Falcon-NEO can produce audible notification (beeps) when a task finishes
successfully or if an error appears.
1. Tap End of Task to configure the notifications.
Logicube Falcon -Neo User's Manual
®
The screen brightness cannot be saved and
loaded as a user profile. Each time the Falcon-
NEO boots, the brightness will be reset to 80%.
Stealth mode will not have any effect when using the Graphical
User Interface through a computer's Internet browser.
TYPES OF OPERATIONS
86