Verify Hash; Special Settings In File To File Mode; Root Directory; Output Format - Logicube Falcon-NEO User Manual

4.3.7 Verify Hash

In File to Drive (Image Restore) mode, Verify Hash will appear on the top-right side of
the Settings screen. This screen allows the user to set the verification of the task.

4.3.8 Special Settings in File to File mode

There are three special settings screens in File to File Mode:



®
-Neo User's Manual
Logicube Falcon

Root Directory

Output Format

Filter Settings
4.3.8.1 Root Directory
In this screen, the top level (root) directory can be set. All searches will
start from this directory. For example, the fourth partition of the drive on
SAS_S1 can be selected by tapping the folder icon. The folder icon is only
selectable after a Source is selected.
4.3.8.2 Output Format
The Output format screen shows the following selections:
IMAGING
46