Concluding Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
Figure 55: Securing the HDD/SSD bridge board
Ê Fold down the HDD/SSD bridge board (1).
Ê Carefully shift the HDD/SSD bridge board in the direction of the arrow (2)
until the shoulder screw caps on the chassis will rest in the narrow ends of
the keyhole slots on the HDD/SSD bridge board (see circles).
7.6.3

Concluding steps

Perform the following procedures:
"Installing the midplane kit" on page 153
Ê
Ê Install all HDD/SSD backplanes as described in section
inch HDD/SSD backplane" on page
"Installing the fan modules cage" on page 107
Ê
Ê Install all fan modules as described in section
page 133.
"Closing the server enclosure" on page 51
Ê
"Mounting the server enclosure in the rack" on page 61
Ê
Ê Install all HDD/SSD modules in the relevant HDD/SSD cages as described
in section "Removing 2.5-inch HDD/SSD modules" on page
"Connecting the power cord" on page
Ê
"Switching on the server node(s)" on page
Ê
CX400 M4
Upgrade and Maintenance Manual
106.
"Installing the fan module" on
71.
72.
"Installing the 2.5-
98.
113