Removing The Hot-Plug Psu - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Power supply unit (PSU)
6.2.2

Removing the hot-plug PSU

Figure 39: Removing the hot-plug PSU
Ê Pull the handle of the hot-plug PSU halfway upward in the direction of the
arrow (1).
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the hot-plug PSU in the direction of the arrow
(3).
V
CAUTION!
Never leave the bay for the hot-plug PSU empty for more than two
minutes during operation. Otherwise, excessive temperatures could
damage system components.
84 Upgrade and Maintenance Manual
CX400 M4