Installing A 2.5-Inch Hdd/Ssd Module; Concluding Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.2.3

Installing a 2.5-inch HDD/SSD module

Figure 45: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the release lever in the direction of the arrow (2).
7.2.4

Concluding steps

Perform the following procedures:
"Performing a RAID array rebuild" on page 75
Ê
CX400 M4
Upgrade and Maintenance Manual 97